LCD Monitor Glue Strip Pressing
Customer Pain Points:
Manual glue strip pressing is difficult to maintain a straight line. Unequal force application may result in unfirm adhesion.
The edges of LCD screens are very thin, and can be easily damaged by manual labor.
Traditional automation equipment is hard to deliver satisfactory results, plus long downtime is required.
Solution:
A CR5S robot is equipped with a specialized end effector to handle vertical and horizontal pressing of multiple glue strips on both sides of the LCD panel. The CR5S is equipped with the SafeSkin to enable pre-collision detection for even safer human-machine collaboration.
Value Proposition:
Replaces 2 workers.
Reduces chance of workplace injuries.
Increases efficiency by 20%.
99% production yield.
Product Highlights:
The CRS series is equipped with the SafeSkin to automatically work around obstacles at no speed reduction to ensure safety and efficiency.
The series supports graphical programming and drag-to-teach for easy operation. A worker can get familiar with the CRS robots in 10 minutes. The robots can be redeployed without requiring much programming effort.
%20.png)
* 上記のデータは、Dobot Laboratoryが特定のテスト条件下で取得したテスト結果を表しており、実際の応用シナリオと比較すると若干の差異が見られる場合があります。
Dobotの専門家との連絡を確立
自動化の変革に参加しましょう。より効率的な将来を目指して、一緒に頑張りましょう。