The Magician Lite is a multi-functional lightweight intelligent robotic arm made for K12 education. Students can interact with the Magician Lite using software, hardware and expansion interfaces to maximize their creative freedom. Through the process of buidling and playing, they can learn how AI and robots work. They will also be introduced to the world of robotics and how robots can be applied in the real world.
The Magician Lite has a 0.2 mm repeatability, a maximum payload of 0.25 kg and a maximum reach of 340 mm, and supports a wide variety of end effectors, such as a soft gripper, suction cup and pen grasper. Equipped with collision detection, it ensures the safety of young learners and operators.
The Magic Box is the external control unit for the Magician Lite that handles programming. It has 12 communication interfaces, supports Bluetooth and is compatible with a range of accessories.
The DobotLab software platform offers a variety of methods to program robots. Intuitive graphical user interface allows for block programming to easily enable AI functionalities on the Magician Lite.
Complete robotics courses of different leves are available for students to learn chapter by chapter. Introduce programming and robotic skills to young learners to help them succeed in the future.
Optional drawing, industrial 4.0, AI vision, and sensor kits opens door to futher creativity.
本社：東京都港区浜松町２丁目１-１２ VORT浜松町Ⅲ ４F
TEL：03-6381-5818
FAX：03-6381-5828
名古屋テクニカルセンター：愛知県名古屋市東区徳川1-901 サンエース徳川302
TEL：052-325-8118
| DOBOT Magician Lite | |
| Degree of Freedom | 4 |
| Maximum Load | 250 g |
| Max Reach | 340 mm |
| Repeatability | ±0.2 mm |
| Voltage | 100V - 240V AC,50/60 Hz |
| Power Input | 12V ～ 5A DC |
| Working Environment | -5° ～ 45° C |
| Power | 60W Max |
| Communication | USB Virtual Serial Port / Serial Port |
| Software | DobotStudio/DobotLab |
| Weight | 2.4 KG |
| Rear Arm / Forearm | 150 mm |
| Base Size | 146 mm x 146 mm |
| Magic Box | |
| MCU | ARM 32-bit Cortex-M4 |
| Main Frequency | 168 MHz |
| Voltage | 100V - 240V AC,50/60 Hz |
| Power Input | 12V ～ 5A DC |
| Working Environment | -5° ～ 45° C |
| Power | 60W Max |
| Communication | USB Virtual Serial Port/Serial Port/Bluetooth |
| Programming Language | MicroPython |
| Software | DobotStudio/DobotLab |
| Weight | 98 g |
| Size | 95 mm x 80 mm x 21.5 mm |
| Axis Motion | |
| Axis 1- Base | -135° to +135° |
| Axis 2- Rear Arm | -5° to +80° |
| Axis 3- Fore Arm | -10° to +85° |
| Axis 4- End Tools | -145° to +145° |
| J1-J3 Max speed | 300°/s |
| J4 Max speed | 200°/s |
| End Tools | |
| Pen Holder | Pen Diameter: 8-12 mm |
| Suction Cup | Built-in air pump drive works under negative pressure, with suction cup diameter of 10mm, 20mm |
| Soft | Built-in air pump drive works under positive and negative pressure, with maximum opening and closing |
| Gripper | distance of 50 mm |
| Expansion Interface | ||
| Power Interface | 2 | 4PIN, 12V～3A DC |
| Multi-Functional Communication Interface | 2 | 10PIN, Serial Communication Interface |
| I/O Interface | 6 | Green Terminal, 4PIN, 3.3V/5V-IO, 5V 1A-VCC, Multi-Function Multiplexing Interface, User-Defined I/O, AD, PWM Output, I2C, etc |
| Stepper Motor Interface | 2 | Yellow Terminal, 4PIN, 2-Phase Stepper Motor, 16 Subdivision, 12V 1A |
| 12V Power Interface | 2 | Red Terminal, 2PIN, 12V, 3A Max |
| AI Camera Kit | |
| Dimensions | 50mm*44mm*25mm |
| CMOS | 1/4inch |
| Image pixels | 1M |
| Image Format | YUV/MJPG |
| Data Format | 240*320. 640*480. 1280*720 |
| Maximum Image Transfer Rate | 1280*720@30fps |
| Camera Control | Saturation，Contrast, Acutance |
| White balance | Auto |
| Exposure | Auto |
| Working Temperature | 0℃ to +50℃ |
| Operating voltage | DC 5V |
| Interface | USB2.0 |
| Voice input | Integrated microphone |
| Feature | All-in-one design, integrated microphone, distortion-free lens |
| Camera working angle | 0°-135° |
| Function | Face recognition, image recognition, OCR text recognition, speech recognition, etc. |
自動化の変革に参加しましょう。より効率的な将来を目指して、一緒に頑張りましょう。
金属加工
自動車
飲食
化学
家電
ニューリテール
医療
半導体
溶接
パレタイジング
積み降ろし
組み立て
ビンピッキング
.svg)
接着
挿入
研磨